Product Categories
Miscellaneous Products
Hobart Helmets
Coleman Backup Power Systems
Evolution Heavy Duty Saws
Generators
Saws and Blades
View Cart
Product Search:
Hobart Welders
Hobart Champion 10K
$2,749.00
500434
Product Description Specifications: -20 HP, 3600 RPM Kohler gasoline engine. Fuel-efficient, low-maintenance, twin-cylinder, 4-cycle, overhead-valve. 10 gallon fuel tank for extended run time.
Quantity
Stickmate® 205 AC
$290.00
$269.00
On Sale!
*Accu-Set® amperage indicator for accurately controlling amperage or heat output *Infinite current control allows the operator to adjust output by as little as 1-amp increments *High 100% duty cycle rating (90 Amps AC) Fully varnished magnetic coils for enhanced coil reliability and life *Max. 80 Open-circuit voltage assists with arc starting and arc stability Stock Number #500 502 Standard Rated Output at 25 V 165 amps at 25 VAC, 20% duty cycle, 50/60 Hz Max. Open-Circuit Voltage 80 V Welding Amperage Range 30 - 205 Amps Input at Rated Output, 50/60 Hz 230 V: 47.5 Dimensions H: 18-3/4 in (476 mm) W: 12-3/4 in (323 mm) D: 17-1/2 in (445 mm) Net Weight 83 lb (38 kg) List Price (US$)* #500 502 $290.00
Stickmate® LX 235 AC
$348.00
$309.00
On Sale!
*Accu-Set® amperage indicator for accurately controlling amperage or heat output *Infinite current control allows the operator to adjust output by as little as 1-amp increments *Output selector switch to quickly select low or high range without adjusting the output leads *High 100% duty cycle rating (100 amps AC) *Fully varnished magnetic coils for enhanced coil reliability and life Stock Number #500 420 Standard Rated Output at 25 V 225 A at 20% Duty Cycle, 60 Hz 225 A at 15% Duty Cycle, 50 Hz Max. Open-Circuit Voltage 80 V Welding Amperage Ranges High 40 - 235 Low 30 - 150 Amps Input at Rated Output, 50/60 Hz 230 V: 47.5 Dimensions H: 18-3/4 in (476 mm) W: 12-3/4 in (323 mm) D: 17-1/2 in (445 mm) Net Weight 85 lb (39 kg) List Price (US$)* 500 420 $348.00
Stickmate® LX 235 AC / 160 DC
$545.00
$459.00
On Sale!
*Accu-Set amperage indicator for accurately controlling amperage or heat output *Infinite current control allows the operator to adjust output by as little as 1-amp increments *Output selector switch to quickly select low or high range without adjusting the output leads *High 100% duty cycle rating (100 amps AC/65 amps DC) *Fully varnished magnetic coils for enhanced coil reliability and life *Forced-draft cooling fan runs continuously and helps to extend the life of the power source *Replaceable weld cables Comes complete with: 15 ft (4.6 m) electrode cable with heavy-duty holder 10 ft (3 m) work cable with clamp 6 ft (1.8 m) primary cable with plug Process AC/DC Stick (AC/DC SMAW) Power CC AC 1 Phase Skill Level Moderate Applications Maintenance Construction Farm/Ranch Rental
Handler 125
$389.00
$359.00
On Sale!
Handler® 125 / Handler® 125 MIG Rugged and portable, the Handler® 125 operates off 115-volt household current. Comes ready to weld without shielding gas using .030-.035 in (0.8-0.9 mm) flux cored wire. For greater versatility, consider the Handler® 125 MIG (or upgrade the Handler 125 with the optional MIG conversion kit.) This unit has a solenoid valve installed for welding with .023-.030 in (0.6-0.8 mm) solid wire and gas shielding. Use C-25 gas (75% argon/25% CO2) on 22 gauge - 1/8 in steel for a cleaner weld with less spatter. Use Tri-Mix gas and stainless wire for welding on 16-12 gauge stainless steel. Comes complete with: Comfortable 8 ft (2.4 m) H-9 gun with liner for .023-.035 in (0.6-0.9 mm) wire Three .030 in (0.9 mm) contact tips 10 ft (3 m) work cable with clamp 1 lb spool of .030 in (0.9 mm) self-shielding flux cored wire Spool shaft to accommodate 4 in spools (Optional hub kit available for 8 in spools) Power cord with plug Weld set-up and parts information chart The Handler 125 MIG also includes a gas solenoid valve, Argon-mix regulator and 5 ft (1.5 m) gas hose Power CV DC 1 Phase Processes Flux Cored (FCAW) MIG (GMAW) Material Thickness Welds 20 gauge up to 3/16 inch Skill Level Low Applications Farm/Ranch Light Maintenance and Repair Light Fabrication
Handler® 140
$537.00
$499.00
On Sale!
Handler® 140 The Handler® 140 operates off 115 volt standard household current for maximum versatility. Comes ready to weld with or without shielding gas, no additional kit required. With an amperage output range of 25 - 140, it easily handles a broad selection of solid mild steel or stainless, flux cored and aluminum wires. Comes complete with: Comfortable 10 ft. (3 m) H-10 MIG welding gun Built-in gas valve Regulator and gas hose Power cord with plug 10 ft. (3 m) work cable with clamp 1 lb. spool of .030 in. (0.8mm) self-shielded flux cored welding wire 8 in (203 mm) wire spool adapter Extra .030 in. (0.8 mm) contact tips Weld set-up and parts information chart Power CV DC 1 Phase Processes MIG (GMAW) Flux Cored (FCAW) Material Thickness Welds 24 gauge up to 1/4 inch Skill Level Low Applications Maintenance Construction Auto Body Farm/Ranch Rental Home
Handler® 180
$704.00
$599.00
On Sale!
Handler® 180 Powerful and portable, the Handler® 180 operates off 230 volt power. Comes ready to weld with or without shielding gas, no additional kit required. With an amperage output range of 25 - 180, it easily handles a broad selection of solid mild steel or stainless, flux cored and aluminum wires.
AirForce 250A
$1,150.00
$1,059.00
On Sale!
AirForce™ 250A The Hobart AirForce™ 250A plasma cutter offers convenient cutting of all conductive metals and comes complete with a built-in piston-driven air compressor providing a "ready to cut out of the box" unit. Comes complete with: Built-in piston-driven air compressor ICE-12C torch with 20 ft (6 m) lead and consumables 15 ft (4.6 m) heavy duty work clamp 10 ft (3 m) power cord with 115 VAC plug Power DC 1 Phase Skill Level Low Process Air Plasma Cutting Applications Sheet Metal HVAC Auto Body Farm/Ranch Plumbing View Cutting Chart
